Most boat seats are normally made of vinyl, which is a genuinely fragile material. Vinyl particularly suffers on the off chance that you don’t regularly look after it. If your boat seats are beginning to show ravages of time, you can make them look as good as new with your own reupholster project. Just as replacing the boat seat vinyl and foam, it likewise offers you the chance to change up colors of the covers if you wish by contacting the company offering seat covers in Oshawa, Ontario.
By figuring out how to reupholster your boat seats, covers, and cushions you could likewise save yourself a lot of cash compared to an expert doing it, or purchasing new seats completely. Lots of people have done this project and reupholster their pontoon boat themselves (without sewing), and you can read through the step by step process below, including the tools and materials you will require if you want to know how to reupholster your boat seats.
Before you follow this guide, it doesn’t actually matter how your seat got harmed. This tip will help you reupholster your boat seat paying little mind to the harm.
The most effective method to reupholster boat seats without Sewing
First up, most boat owners prefer to cover reupholstering boat seats with no sewing. Rather than sewing, the method described below requires stapling. You may have to get yourself a stapler for this task, at the end of the day you will finish the work a lot quicker with sewing.
With that, here are step-by-step guidelines on boat seat reupholstering. Incidentally, the tips bellow will likewise help you reupholster boat interior. The process is pretty much the same and should translate to other upholstery well.
- Take out and inspect the seat
Your main objective might be to simply replace the vinyl cover of your seat, however are you sure that you won’t have to do anything else? It is because you may need to manage two other quite major issues:
- Moist or damaged foam
- Rotting wood
In the event that you don’t treat these quickly, then your brand new vinyl cover may meet its end sooner than you’d want. Look at the wood beneath and around the seat first – in the event that you see any indications of rotting, then you should replace the structure also. Then, you should likewise probably check the condition of the foam. On the off chance that the wood underneath the seat is rotten, then it`s likely that some moisture has made it into the seat too. If you won’t utilize the seat until the upholstery replacement, then you may open it up and check the foam. On the off chance that it appears to be fine, then you don’t have to replace it.
- Measure the Vinyl and Foam
You should make sure that your new vinyl cover and foam cushioning have similar size as your old ones. Considering that, you should remove your seat’s current cover and, if important, the foam filling. To take your cover off, you may have to remove staples from under the seat. Check out the seat to decide how the cover is fixed to it. When you remove the old vinyl, spread it out flat and measure it. On the off chance that the foam filling needs replacement as well, measure it too.
- Cut vinyl and foam using your measurements
Utilizing your measurements cut the necessary amount of vinyl and foam. When cutting the vinyl, you should place the old vinyl cover on top of the new sheet which you can buy from company offering boat covers in Oshawa and with your marking pencil make a trace around it. After that, cut a vinyl piece of required size and shape. With foam, you may cut somewhat more to give the seat a cushier feel. Yet, don’t try too hard – if you take a lot of foam, you may struggle with stuffing it into the seat. If your foam is thick, scissors will be unable to cut it. Utilize an electric knife instead.
- Start assembling the seat
When your vinyl cover and foam filling are prepared, you may begin assembling the seat. Place the vinyl on a flat surface. Lay the foam onto the cover and on top of it the seat base. Ensure that the foam is centered on the vinyl cover.
- Attach the vinyl cover to the Seat Base
Get the front of the vinyl cover and pull it over-top the seat’s wooden base. Stretch the vinyl as tight as you can to ensure that it sits cozily against the foam. Then, take your stapler and begin attaching the vinyl to the wood. Punch in 4 staples first of all – this will allow you to fix the vinyl in place and avoid wrinkling. At that point, staple the rest of the cover with a spacing of 1-2 centimeters. Once you are finished with the foam, move to the back and repeat the same. At last, staple the sides of the vinyl cover, again utilizing the procedure described before.
- Apply Vinyl protection to the Cover
After everything’s stapled in place, your new seat is prepared for use. All things considered, at the end apply some vinyl protection to it. One good choice is the 303 Products Marine and Recreation Aerospace protection. This protection blocks UV, as well as prevents breaking and untimely aging. It should likewise give an appealing shine to your new cover.
If you faced any problems during the process don`t hesitate to contact the company offering boat carpet in Oshawa. They can give you some professional advice regarding your reupholstering process and if the task is too difficult for you, they can also do your reupholstering project in a professional way as they are specialists in this task.